User setup guide

• Licences
• Frequently Asked Questions
• Deployment

Setting up mXrap on your PC? Here's a quick guide to using your licence.

Software needed

1. Head to Downloads and download the necessary installers. You will need mXrap and CodeMeterRuntime to start using mXrap. The username and password to access the downloads will have been sent to you during setup - email if you don't have them.

2. Install CodeMeterRuntime.exe. This small application will allow your PC to communicate with the mXrap licence servers. The installation options should be left as default.

nota

This step requires local admin access.

3. Install mXrap with the default installation options. This does not require admin privileges and installs to %localappdata%. This will install 3 new applications, which can be found in the Start Menu.

• mXrap
• About mXrap
• mXsync

Licence types

An overview of the types of licence deployment options available can be found here.

Dongle

You will need one of the following:

Type	Image
USB-A
USB-C
Legacy

Make sure the CodeMeter Runtime is running, then plug it into a spare USB port on your device. Done!

Online

See Online Licence Setup.

Software

We do not generally deploy software licences to individual devices, as they are best suited to licence servers. Email if you want to discuss your options.

Network

See this guide.

Troubleshooting

Refer to our Troubleshooting Licence Issues guide. If you still can't access mXrap, email us at with any relevant screenshots or error logs.